赤外線・バックカメラ

X201 Infrared reversing camera

赤外線バックカメラ. 解像度 1.0M, フレームレート 25 fps, レンズ 2.8mm, インターフェース AHD, 電圧 12V ± 10%, ナイトビジョン IR

X201 Infrared reversing camera の製品画像
型番 X201

X201 Infrared reversing camera の概要

赤外線バックカメラ. 解像度 1.0M, フレームレート 25 fps, レンズ 2.8mm, インターフェース AHD, 電圧 12V ± 10%, ナイトビジョン IR

Resolution
1.0M
Frame Rate
25
Lens
2.8mm
Interface
AHD
Voltage
12V ± 10%
Night Vision
IR
見積りを依頼 OEM/ODMオプション

深セン工場のエンジニアと直接つながります — MOQ・納期・組み込みをご用途に合わせて確認します。

  • Night Vision IR
  • MOQ Low MOQ (OEM/ODM)
  • Lead Time Engineer-confirmed lead times
  • Warranty Replacement warranty

X201 Infrared reversing camera の仕様とダウンロード

赤外線バックカメラ は、トラック・トレーラー・バスの後方を昼夜を問わず鮮明に映すために設計されています. 解像度・インターフェースなどの主要仕様: 解像度 1.0M, フレームレート 25 fps, レンズ 2.8mm, インターフェース AHD, 電圧 12V ± 10%, ナイトビジョン IR(公式仕様書で検証済み)。 YUNTOR は自社開発ハードウェアをベースに、低 MOQ の OEM/ODM 対応で本モデルをカスタマイズします。完全なデータシートとアプリケーションノートについては、エンジニアまでお問い合わせください。

  • Resolution: 1.0M
  • Frame Rate: 25 fps
  • Lens: 2.8mm
  • Interface: AHD
X201 Infrared reversing camera の技術仕様
Model X201
Type Infrared reversing cameras (metal housing)
Resolution 1.0M
Frame Rate 25 fps
Lens 2.8mm
Interface AHD
Voltage 12V ± 10%
Night Vision IR
MOQ Low MOQ (OEM/ODM) — contact for current terms
Lead Time Contact our engineer for current lead times
Warranty Replacement warranty — contact for current terms

Need the full X201 specification sheet, drawings or integration notes? Our engineer sends the complete datasheet on request — no lengthy forms.

ダウンロードセンター

X201 があなたの車隊にどうフィットするか — 当社の業界ソリューションに基づく確認済みの適用シナリオ。

標準的な設置レイアウト

X201 の参考取り付け位置 — 実際の設置は車両により異なります。

  • メインカメラ(AVM/BSD)
  • 補助カメラ(DMS/バック)

簡易配線図

X201 の標準的な組み込み — 車両別のピン配置は取扱説明書をご確認ください。

主な接続: カメラ → ECU(映像+電源)→ モニター(映像出力)→ 電源(ヒューズ付き12/24V)。
4Gアンテナ・GPS・トリガー線(バック/旋回)は車両ハーネスに応じてECUに接続します。

車両適合ガイド

X201 に対応する代表的な車両クラス — ご注文前に寸法と電圧をご確認ください。

車両クラス 代表的なモデル 取り付け位置 電圧
Heavy Truck (N3)Tractor units, dump trucks, concrete mixersFront grille, side mirrors, rear bumper24V DC
Medium Truck (N2)Box trucks, refrigerated trucks, flatbedsFront, sides, rear corners24V DC
Light Commercial (N1)Vans, pickups, chassis cabsFront grille, rear license plate area12V DC
Bus & Coach (M3)City buses, intercity coaches, school busesFront, side doors, rear, interior24V DC
Construction MachineryExcavators, loaders, dumpers, cranesCab roof, boom, rear counterweight12-24V DC

注意: これは一般的なガイドです。実際の適合性は車両の年式・車体・装備により異なります。VINまたは車両仕様をご連絡の上、エンジニアにご確認ください。

  • Fleet Management

    A fleet management camera system combines 360° surround view, blind-spot detection and driver monitoring with 4G dual-channel recording, so operators cut side-swipe and reversing accidents while tracking vehicle location and driver behavior in real time. YUNTOR configures cameras, hosts and 4G terminals per vehicle type at low MOQ on self-developed boards.

  • Commercial Vehicles

    A commercial vehicle safety solution combines 360° AVM, DMS/ADAS, BSD cameras and 4G recorders into one configurable package from a single source factory, letting mixed fleets standardize on one trusted supplier with low-MOQ customization. YUNTOR designs its own PCBs and firmware, so custom branding, housing and protocols avoid the high MOQs of large suppliers.

関連する業界ソリューション

  • Fleet Management

    YUNTOR fleet management solutions combine 360° surround view, driver monitoring (DMS) and blind-spot detection (BSD) with 4G dual-channel recording — reducing accidents and giving logistics operators real-time visibility across long-haul fleets.

    Fleet Management を詳しく見る →
  • Commercial Vehicles

    YUNTOR commercial vehicle solutions bring together the full product line — 360° AVM, DMS/ADAS, BSD cameras and 4G recorders — into configurable safety packages for general commercial fleets, direct from a source factory.

    Commercial Vehicles を詳しく見る →
よくある質問

X201 に関する購入者の質問

X201 は何に使用されますか?

X201 は商用車向け 赤外線・バックカメラシリーズ の一員です。YUNTOR が自社工場で製造・検査しています。

X201 の主な仕様を教えてください。

X201 の主要仕様は resolution 1.0M, frame rate 25 fps, lens 2.8mm, interface AHD, voltage 12V ± 10%, night vision IR(公式仕様書で検証済み)です。完全な仕様表についてはエンジニアにお問い合わせください。

X201 の最小ロット(MOQ)はどのくらいですか?

カスタム注文は低 MOQ での OEM/ODM 生産に対応し、自社開発ハードウェアへのプライベートブランドも可能です。最新の条件はエンジニアまでお問い合わせください。

X201 の試作・納期はどのくらいかかりますか?

納期は構成と現在の生産状況により異なります。ご仕様をお送りいただければ、エンジニアがスケジュールをご案内します。

X201 に保証はありますか?

全機に交換保証が付いています。不具合品は直接交換いたします。現在の保証条件はお問い合わせください。

X201 について工場のエンジニアに相談する

MOQ・納期・データシート・組み込みをご用途に合わせて確認 — 深セン工場のエンジニアが直接お答えします。